ProScan PSVR83, Руководство пользователя

Страница: 49 / 64

47
Audio and Video Dubbing
To Video Dub (Refer to hookup on page 8, Option B.)
1. Connect the two VCRs and turn them on.
2. Tune TV to the VCR viewing channel, either 3, 4, or the TVÕs video input.
3. Press INPUT on recording VCR to select the line input (L1 or L2). ÒLÓ or ÒL2Ó
appears in the VCRÕs display panel and ÒVIDEO 1Ó or ÒVIDEO 2Ó appears
on the TV screen.
4. Insert the tape you want to copy into playback VCR. Insert a tape you want
to dub with the safety tab in place in the recording VCR.
5. Press PLAY. When you reach the point on the tape where you want to begin
dubbing, press PAUSE.
6. Press A¥V DUB on the recording VCRÕs remote until VDUB appears in the
VCRÕs display panel. The VCR enters the video dubbing mode and VDUB
remains in the VCRÕs display panel.
7. Press PLAY on the playback VCR. Then, press PAUSE. The VCR enters the
play-pause mode.
8. Press PAUSE on both VCRs at the same time to begin dubbing the tape.*
9. Press STOP¥EJECT on the VCR or STOP on the remote when you are
finished.
* You can turn off the TV after the dubbing has started as it does not have
to be on to dub a tape.
To Audio and Video Dub
1. Connect the dubbing source(s) and follow steps 1Ð 5 above.
2. Press A¥V DUB on the recording VCRÕs remote until A/V DUB appears in
the VCRÕs display panel. The VCR will enter the audio/video dubbing mode
and A/V DUB remains in the VCRÕs display panel.
3. Proceed with steps 7 Ð 8 above.
The existing video, linear audio, and hi-fi audio will be replaced by the new
audio and video.
4. Press STOP when you are finished.