ProScan PSVR83, Руководство пользователя

Страница: 24 / 64

22
Using the Remote Control
Controlling the VCR
The VCRÕs remote controls two compatible ProScan, RCA, or GE VCRs with the VCR1 and VCR2¥DVD
buttons. Most compatible VCRs automatically respond to VCR1 without being programmed. If you own
two compatible VCRs, test them to see if VCR1 turns on both VCRs. If it does, then you may want to
program this VCR to respond to the VCR2¥DVD button on the remote.
Program the VCR for Remote Control
Set the Remote Control feature of the VCR to the VCR1 or VCR2 position.
The remote then controls the VCR with either the VCR1 or VCR2¥DVD
button Ñ whichever position you select in the menu.
1. Press MENU¥PROG to display the VCR MAIN MENU.
2. Press 6 to display PREFERENCES.
3. Press 1 to activate the Remote Control feature.
4. Press VCR1 or VCR2¥DVD to change the setting and program this
VCR to respond to the VCR1 or VCR2¥DVD button Ñ whichever
you select.
Important Reminder : Remember, you must press VCR1 or VCR2•DVD on
the remote — whichever you selected in the menu — before the
remote will operate this VCR.
Program the Remote Control
1. Turn on the component.
2. Point the VCR remote at the component
3. Hold the VCR2¥DVD button and press three number buttons to enter the code
for the component.
4. Release the buttons.
5. Press PWR. If the component turns off, setup is complete.
Operate the Component
After you have set up your remote to control your component, test the remote buttons to see which
ones operate it.
1. Point the remote at the component and press VCR2¥DVD.
2. If the component does not turn on in step 1, press VCR2¥DVD and then PWR.
3. Test the remote buttons to see which ones operate the component.
Controlling a Laserdisc Player or DVD Component
The VCR2¥DVD button on the VCRÔs remote will also control the primary functions of a ProScan or
RCA Laserdisc Player without being programmed. It can also be programmed to control a ProScan,
RCA or GE DVD component using the code below. If you ever need to reprogram the remote to operate
a ProScan, RCA or GE VCR or a ProScan or RCA Laserdisc Player, use the code below.
VCR Laserdisc Player DVD
037 037 078
ProScan, RCA or GE Codes
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 Front Panel: AUTO
5 CA Marking: ON
6 CA Playback: AUTO
7 CA Display: BLUE
8 Set Auto Repeat
0 Exit
PREFERENCES
1 Remote Control: VCR2
2 Auto Play: ON
3 Auto TV/VCR: ON
4 Front Panel: AUTO
5 CA Marking: ON
6 CA Playback: AUTO
7 CA Display: BLUE
8 Set Auto Repeat
0 Exit