61
Reference
Back Panel Controls
IN FROM ANT Use to connect an off-air antenna or cable TV signal
to the DSS
®
system.
OUT TO TV Use to connect the DSS
®
receiver to your TV.
However, if your TV has audio/video jacks, you should use those jacks
to get better picture and sound quality.
S-VIDEO Provides the best picture quality. If your TV has S-VIDEO
capability, use this jack along with the audio/video jacks to connect
the DSS
®
receiver to your TV.
VIDEO Provides better picture quality than the OUT TO TV jack. If
your TV has audio/video capability, use this jack to connect the DSS
®
receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R AND L) Provide better sound quality than the OUT TO
TV jack. If your TV has audio/video capability, use these jacks to
connect the DSS
®
receiver to your TV. You must also connect the
VIDEO jack.
WIDE BAND AND LOW SPEED DATA PORTS These ports allow
you to connect the DSS
®
system to future services and accessories as
they become available. A shielded cable and additional hardware
may be required.
SATELLITE IN Use to connect the DSS
®
receiver to the satellite dish.
PHONE JACK Use to connect a phone line to the DSS
®
receiver. The
DSS
®
system requires a phone line connection to periodically call out
to program providers.
VCR CONTROL Allows the receiver and VCR to communicate with
each other.
REMOTE IN Use in conjunction with the Remote Control
Signal Extender.
OUT
TO
TV
IN
FROM
ANT
S-VIDEO
VIDEO
R
L
AUDIO
WIDE BAND DATA
VCR CONTROL
REMOTE IN
SATELLITE IN
LOW SPEED DATA
PHONE JACK