43
Sending the DSS
®
Signal
to Multiple TVs
Remote Control Signal Extender
If you have one DSS
®
receiver hooked up to two televisions in different
rooms, you need to set up the remote control signal extender in order
to change DSS
®
channels with the remote.
Relay Device
Base Unit
The Relay Device
The Relay Device takes the signal from your remote and transfers
it to the base unit which tells the DSS
®
receiver what to do.
The Relay Device can be placed up to 18 feet away from where
you will be using the remote control, and must be within 100 feet
of the base unit.
The Base Unit
The Base Unit has the antenna, and sits behind or beside your
DSS
®
receiver, and connects directly into the REMOTE IN jack on
the back of the receiver. It takes the signal from the Relay device
and gives it to the DSS
®
receiver.
Hooking It UP
The base unit is designed to be placed behind your DSS
®
receiver,
with the antenna extended out to one side.
Connector Cord
