If you have any questions, please consult the troubleshooting guide below:
NO PICTURE OR SOUND
REMOTE NOT WORKING
●
Ensure the TV is switched on (ie. not in
Stand-by mode).
●
Ensure the power outlet is operational.
●
Ensure the power cord is not damaged.
●
Ensure the power plug is connected firmly to
the mains outlet.
●
Make sure the Main unit‘s POWER switch is on.
●
Ensure the remote batteries are working.
●
Point the remote control directly at the player‘s
IR sensor.
●
Remove any obstacles between the remote
and the IR sensor.
●
Ensure the audio is not set to mute.
●
Ensure you have set the player, AUDIO
settings correctly.
●
Turn off the power, wait 60 seconds, and then
turn it on again.
PICTURE BUT NO SOUND
UNIT NOT WORKING
“NO DISC”DISPLAYED
POOR PICTURE OR SOUND
●
Ensure you have set the player‘s AUDIO
settings correctly.
●
Ensure the disc is not scratched or stained.
●
Ensure you have put the disc in the slot.
●
Ensure the disc is not upside down (the silver
data side should be facing towards you
when viewed from the front of the TV).
●
Ensure the disc is not distorted, stained or
scratched.
●
Ensure the disc is not warped, damaged or
deformed.
●
Ensure the disc is not badly stained or damaged.
●
Ensure the disc format is compatible with the
player.
●
Please check whether you have tried to play a
software CD. If so, please restart the player
using a music CD or DVD.
CAUTION:
The DVD player in this TV is designed for use with
12cm diameter CD and DVD discs ONLY. Never
attempt to insert any other disc types or objects
into the DVD drive, as they may permanently
damage the mechanism and may also not be
retrievable from the drive.
“BAD DISC”DISPLAYED
36
