SETTINGS
Initial Setup
1. Connecting your TV on the poweroutlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light.
CAUTION:Always disconnect the TV from the power outlet when the TV will
not be used for a long period of time. The POWER button on the front panel is only
used for switching the TV into standby, it does not disconnect the device from the
main voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.
3. Press the key
▼
/
▲
/
◄
/
►
and following the picture as bellow to operate the subject.
NOTE:
The picture is for reference only.
Setup Wizard
Connect RF cable to your TV Aerial socket.
TV Location
Set the TV Mode to Home or Retail display use.
Press
◄
/
►
button to select(Home Mode / Store).
Press
▼
/
▲
button to select and press ENTER/
►
button to enter the sub-menu.
Note:
This page is only enable when you have Energy Star request.
16
