Proroute H685, Руководство пользователя

Страница: 14 / 109

E-mail: support@proroute.co.uk www.proroute.co.uk
Blue Flashing (2 seconds on, and 2 seconds off) Signal bar is 1 (Low)
Flashing (1 seconds on, and 1 seconds off) Signal bar is 2 (Medium)
Flashing (0.5 seconds on, and 0.5 seconds
off)
Signal bar is 3 (High)
Chapter 3
3 Software configuration
1.
Overview
2.
How to log into the Router
3.
How to config web
3.1 Overview
The H685 routers have a built-in web Graphical User Interface (GUI) which allows configuration
and management of the router. The web interface also has debugging tools, system logs and
allows updates to the system. The H685 is based in OpenWRT. (OpenWrt is an open-source
project for embedded operating systems based on Linux.)
3.2 How to log into the Router
ONCE YOU HAVE LOGGED INTO THE ROUTER, IMMEDIATELY CHANGE YOUR PASSWORD
FROM THE DEAFUALT PASSWORD TO SOMETHING SECURE AND MEMORABLE.
To access the web interface of the router,
connect an ethernet cable from the LAN port of the
H685 into your PC or Laptop.
The factory default settings of the H685 will have DHCP running on it’s LAN port. Therefore, if the
PC/Laptop’s network adapter is set to obtain an IP address automatically, communication with the
router will be possible and you can reach the web interface.
Normally the network adapter on a Windows 10 machine will be set to obtain an IP address
automatically. This means when the router and PC/laptop are connected with an ethernet cable, the
router’s web interface can be accessed straight away through a web browser (e.g. Chrome, IE, Edge,
Firefox etc.) by inputting the router’s default IP address 192.168.8.1 into the address bar.