V1.0
1,500 LB 120V AC ELECTRIC WINCH
8880429
Visit www.princessauto.com for more information
13
OVERLOAD
The overload protection may kick in if the winch becomes
overheated. Allow several minutes for the winch to cool before
pressing the overload reset button (C) to continue pulling the load.
NOTICE! Do not press and hold the reset button while winching.
This can damage the winch.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at
all times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool.
An improperly repaired tool may present a hazard to the user
and/or others.
CLEANING
Clean the external surfaces with cloth after each use.
LUBRICATION
The winch is permanently lubricated and does not require additional
lubrication. The exception is if the winch is submerged in water.
Open the housing, dry and have a qualified technician re-lubricate
the winch.
Lubricate the steel cable with a light oil from time to time to prevent
corrosion.
