8880429
1,500 LB 120V AC ELECTRIC WINCH
V1.0
8
For technical questions call 1-800-665-8685
POWER CORD
1.
Insert the power cord plug directly to the power supply
whenever possible.
2. Do not operate this tool if the power cord is frayed or damaged,
as an electric shock or surge may occur, resulting in personal
injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or other
faults in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than comfortably
warm while operating the tool.
2.3 Have the power cord replaced by a qualified service
technician.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch plug with wet hands.
4. Prevent damage to the power cord by observing the following:
4.1 Do not pull on the cord to disconnect the plug from an outlet.
4.2 Keep cord away from heat, oil, sharp edges or moving parts.
4.3 Never use the cord to carry the tool.
4.4 Place the electrical cord in a position that prevents it from
coming into contact with the tool and from getting caught by
the workpiece. The cord should always stay behind the tool.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
5.1 Position power cords away from traffic areas.
5.2 Place cords in reinforced conduits.
5.3 Place planks on either side of the power cord to create a
protective trench.
6. Do not wrap cord around the tool, as sharp edges may cut
insulation or cause cracks if wound too tight. Gently coil cord
and either hang on a hook or fasten with a device to keep cord
together during storage.
