Prophete 2960, Руководство по эксплуатации, Страница: 30 / 160

30
ASSEMBLING THE TOWING HITCH
1. Screw the towing hitch to the seat post of the pulling
bicycle (Fig. G). Depending on the diameter of the seat
post, use the supplied compensating bushings
1
,
where necessary. Firmly tighten the front screw of the
hitch
2
(see chapter Torque specifications).
2. Align the rear part of the hitch parallel to the roadway
and firmly tighten the rear screw of the hitch
3
(see
chapter Torque specifications).
3. Hitch the trailer to the bicycle (see chapter Hitching the bicycle trailer).
4. Check the clearance of the tow bar. If there is no clearance, then make individual
adjustments to the trailer equipment.
HITCHING THE BICYCLE TRAILER
1. Loosen the fixing screw
1
and pull the shackle to one
side. (Fig. H).
2. Mount the tow bar to the hitch (Fig. H).
3. Turn in the fixing screw
1
completely (Fig. I).
4. Place the safety strap around the seat post of the
pulling bicycle and clip the snap hook into the eyelet
(Fig. J).
UNHITCHING THE BICYCLE TRAILER
1. Remove the safety strap
1
from the seat post (Fig. J)
2. Loosen the fixing screw
1
and pull the shackle to one
side. (Fig. H).
2. Dismount the tow bar from the hitch.
Assembly
• Attach the towing hitch to the lowest possible point of the seat post.
This provides the best possible road holding and ensures the longest
possible longevity of the trailer and pulling bicycle.
G
I
1
H
1
J
1
3 2
1
BDA_2960__Fahrradanhänger mit Klappbox_D_GB_F_I_NL_PL_H_RO.indd 30 18.12.2014 10:27:57