Zipp Nanocopter WARNING
:
The Zipp Nanocopter is designed for INDOOR or OUTDOOR.
The Zipp Nanocopter blades revolve at high speeds and
can cause damage to the user, spectators and animals. Stand away from the Zipp Nanocopter to reduce the risk of getting
into the flight path. Warn spectators that you will be flying your Zipp Nanocopter so that they are aware of its position.
Before flight, inspect the rotor blades to make certain that the blades are securely fastened to the Zipp Nanocopter.
WARNING!
• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position.
• Turn off the transmitter and Zipp Nanocopter power switches when not in use.
• The included charger is built specifically for the Zipp Li-Poly battery. Do not use it to charge any other battery.
• New alkaline batteries are recommended for maximum performance.
• Parental supervision recommended when flying Zipp Nanocopter.
BATTERY WARNINGS
R
ECHARGEABLE BATTERY:
This Zipp Nanocopter uses a Li-Poly rechargeable battery. If battery no longer stays charged, dispose of battery properly
according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 6 “AA” batteries (not included). Please read the important battery safety warning below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal Hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of properly
according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the wireless infrared remote control when it is not being used for an extended period
of time.
• To clean, gently wipe the remote control and Zipp Nanocopter with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.
TROUBLESHOOTING
Before sending your Zipp Nanocopter in for repair, please check for a solution below.
REPLACING THE PROPELLER BLADE
Your Zipp Nano propeller system is a precision instrument that may need repair or replacement from
time to time for optimal flight function. Crash landing from high-speed aerial flights may cause damage
to your Zipp Nano propellers.
1. The Zipp Nanocopter have four blades, two gray colors A & B on front, and two black colors B & A
on back (see the diagram E).
2. Pick up a blade from the included spare parts and match the marking to the diagram E.
3. Replacing the correct blade to the broken blade.
Problem
Controller not responding
Zipp Nanocopter does not
respond properly to the controller
Zipp Nanocopter loses connection
with controller
Zipp Nanocopter does not fly well
Possible Cause(s)
Weak Batteries; No Batteries
Controller is switched OFF
Low Battery power in Zipp or Controller
Nanocopter and Controller not properly synced
Nanocopter Out of Range
Low Battery power in Nanocopter or Controller
Zipp Nanocopter not Trimmed
Blade, Rotor or other parts may be damaged
Solution
Install new batteries in controller
Switch ON Controller
Ensure Zippbattery is fully charged and
replace controller batteries
Refer to the SYNCING YOUR Zipp section
Fly Zipp closer and within maximum range
Ensure Zipp battery is fully charged and
replace controller batteries
Refer to Understanding Trim Adjustments
Check and repair/replace damaged parts
E
9
10
A
A
B
B
Front
