1.
2.
3.
4.
5.
6.
7.
LANC port
Reducer bushing/adapter **
Allen keys
3/8”-16 Mounting screw
Built-in LP-E6 battery bracket*
Shutter trigger port
3/8”-16 Mounting port
You can use your SliderONE on a tripod
or flat surface.
Place the SliderONE on your tripod and
rotate until it is tight.
SliderONE has 3/8”-16 screw on top for
your tripod head. Place your tripod head
or your edelkrone FlexTILT Head on
SliderONE and rotate until it is tight.
Attach your camera to your tripod head.
Now, you are ready to slide.
Reducer busing is attached to the
3/8”-16 mounting port. If your tripod has
3/8”-16 mounting screw, you need to
dettach the 3/8”-16 reducer bushing by
turning it counter clockwise.
1.
2.
3.
4.
1
2
4
1
4
2
3
TABLE OF CONTENTS
WHAT’S IN THE BOX & THE BASICS
MOUNTING YOUR SLIDERONE ON A TRIPOD
USING WITH FLEXTILT HEAD
ADJUSTMENTS
START USING
1.
2.
3.
4.
5.
1. WHAT’S IN THE BOX & THE BASICS
A detailed video explaining the mounting process can be found at:
http://edel.kr/so
2. MOUNTING SLIDERONE ON A TRIPOD
The FlexTILT Head is recommended
as a tripod head solution for the
SliderONE.
With the FlexTILT Head 2,
you can easily:
-Adjust the center of gravity,
-Pan/tilt, and
-Change the height of the camera.
3. USING WITH FLEXTILT HEAD
A detailed video explaining how to operate the SliderONE can be found from :
manuals.edelkrone.com
A detailed video explaining how to use the FlexTILT Head with SliderONE
can be found at:
http://edel.kr/so
7
6
3
5
*The battery bracket is located in different places in SliderONE v2
& SliderONE PRO v2.
**Reducer busing (6) is attached to the 3/8”-16 mounting port (4)
