pronovost PGS-740, Руководство оператора и каталог запасных частей, Страница: 13 / 36

- 13 -
ASSEMBLY
ASSEMBLY
1) The Snowblower is shipped partly assembled.
2) Install 3-point system according to the model of
your Snowblower. (See section 10 for part
numbers). Use the holes most convenient to the
type of tractor used (Fig. 23).
3) Install P.T.O. shaft with the shear pin end onto the
Snowblower gear box. Then attach both safety
shield support chains to tractor and snowblower
(Fig. 24).
WARNING: The telescoping tubes of
the drive shaft must never be allowed to bottom
out while maintaining a minimum overlap of 6
inches.
4) For the installation of the chute rotation
mechanism, please refer to page 14.
4
Figure 23
Figure 24