PRONAR T669/1 Скачать руководство пользователя страница 75

Страница: 75 / 137

SECTION 4

Pronar T669/1

4.9

4.3

COUPLING AND UNCOUPLING SECOND TRAILER

A second trailer may only be connected, if it is a machine built on a dual axle chassis and if it

fulfils all the requirements specified in section 1. Coupling a second trailer to the assembly

requires experience in driving an agricultural tractor with a trailer. It is recommended while

coupling the second trailer to use the help of another person to guide the tractor driver.

DANGER

When hitching, there must be nobody between the trailers. Person assisting hitching up
machines should stand outside the area of danger and be visible to the tractor driver at all
times.

Coupling second trailer

The tractor with the coupled first trailer is positioned directly in front of the

drawbar of the second trailer.

Immobilise second trailer with parking brake.

Remove pin from the hitch of the first trailer.

If the trailer is fitted with automatic rear hitch, lift the pin by the handle

(3) - figure (4.2).

Adjust the height of the drawbar of the second trailer in such a manner to

enable coupling the machines.

Reversing tractor, drive the rear hitch of the first trailer onto the drawbar of the

second trailer.

If the trailer is equipped with an automatic rear hitch, ensure that the

hitching operation is completed and that drawbar eye of the second

trailer is secured.

Содержание T669/1










































































































































Результаты поиска

Содержание T669/1

Отзывы:

PRONAR T669/1, Руководство оператора, Страница: 75 / 137

Результаты поиска

Содержание T669/1

Отзывы: