PRONAR PUV-1400, Руководство оператора

Страница: 47 / 66

SECTION 4 PUV-1400
4.11
FIGURE 4.4 Setting working position
ATTENTION
It is not recommended to operate the machine in heavy duty conditions with a speed
exceeding 6 km/h.
Working speed depends on the quantity and quality of collected material but also on the type
of terrain.
4.5.3 SETTING THE WORKING HEIGHT
DANGER
Setting the working height should be performed only when the engine is stopped, and
the machine is raised and secured.
In the snowploughs equipped with slides (FIGURE 4.5), the working height adjustment is
performed by unlocking nut (2) and bolt (3) and proper extension or withdrawal of slide (1) in
guide. When the height is set, secure the slide by tightening bolt (3) and nut (2). Adjustment
of the left slide and the right slide is carried out in the same way. Slides of the left and right
mouldboard should be put forward at the same height. The recommended distance of the
collecting strips from the cleared surface is 5 ÷ 12 mm.