PRONAR PUV-1400, Руководство оператора

Страница: 62 / 66

PUV-1400 SECTION 5
5.10
5.6 STORAGE
After finishing work, machine should be thoroughly cleaned and washed with water jet. While
washing do not direct a strong water or steam jet at information and warning decals or
hydraulic conduits. Nozzle of pressure or steam washer should be kept at a distance of not
less than 30 cm from cleaned surface.
After cleaning, inspect the whole machine, inspect technical condition of individual elements.
Used or damaged elements should be repaired or replaced.
In the event of damage to the paint coat, clean rust and dust from damaged area, degrease
and then paint with undercoat and after it is dry paint with surface coat paint retaining colour
uniformity and even thickness of protective coating. Until the time of touch-up painting, the
damaged place may be covered with a thin layer of grease or anticorrosion preparation.
Machine should be kept in closed or roofed building.
If the machine shall not be used for a long period of time, protect it against adverse weather
conditions. Lubricate machine according to the instructions provided. In the event of
prolonged work stoppage, it is essential to lubricate all elements regardless of the period of
the last lubrication process. Additionally, before the winter period, apply grease to hitching
system pins.