PRONAR PT610 Скачать руководство пользователя страница 33

Страница: 33 / 131

SECTION 2

Pronar PT610

2.7

with the aid of load box support. The load box may not be loaded. The trailer must

be hitched to the tractor and secured with chocks and parking brake.

2.1.6 TRANSPORTING THE MACHINE

•

During travel on public roads comply with the road traffic regulations and transport

regulations in force in a given country, in which the trailer is used.

•

Do not exceed the permitted speed arising from road conditions and design

limitations. Adjust travel speed to the prevailing road conditions, trailer load and

road traffic regulations limits.

•

The machine must NOT be left unsecured. When not connected to the tractor, the

trailer must be immobilised with parking brake and protected against rolling with

chocks or other objects without sharp edges placed under the front and back

trailer wheels.

FIGURE 2.1

Method of placing chocks

(1) wheel chock, (2) wheel of rear axle

Содержание PT610




































































































































Результаты поиска

Содержание PT610

Отзывы:

PRONAR PT610, Руководство оператора, Страница: 33 / 131

Результаты поиска

Содержание PT610

Отзывы: