background image

2

IMPORTANT SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

This symbol indicates that dangerous voltage 

instituting a risk of electric shock is present 

within this unit.
This symbol indicates that there are important 

operation and maintenance instructions in the 

literature accompanying the appliance.

Electricity may cause personal injuries and property 

damage if handled improperly. The screen has been 

engineered and manufactured with the highest priority on 

safety. But IMPROPER USE CAN RESULT IN POTENTIAL 

ELECTRIC SHOCK OR FIRE HAZARD. In order to prevent 

potential danger, please observe the following instructions 

when installing, operating and cleaning the product. To 

ensure your safety and prolong the service life of your 

screen, please read the following precautions carefully 

before using the product.

1. Read these instructions

---All operating instructions 

must be read and understood before the product is 

used.

2. Keep these instructions

---These safety and operating 

instructions must be kept in a safe place for future 

reference.

3. Note all warnings

---All warnings on the product and in 

the instruction manual must be observed closely.

4. Follow all instructions

---All operating instructions must 

be followed.

5.Attachments

---Only use attachments/accessories 

specified by the manufacturer. Do not use attachments 

which are not recommended by the manufacturer. Use 

of improper attachments can result in accidents.

6. Power source

---This product is intended to be supplied 

with a listed power supply indicated on the marking 

label. If you are not sure of the type of power supply at 

your location, consult your product dealer or local power 

company. For added protection for this product during a 

lightning storm, or when it is left unattended and unused 

for a long period of time, unplug it from the wall outlet 

and disconnect the cable system. 

7.Power cord protection

---Protect the power cord from 

being walked on or pinched particularly at plugs, wall 

outlet, and the point where they exit from the device.

NOTE:

 Where the mains plug or an appliance coupler is 

used as the disconnected device, the disconnected 

device shall remain readily operable.

8. Overloading

---Do not overload wall outlets, extension 

cords, or convenience receptacles on other equipment 

as this can result in a risk of fire or electric shock.

9. Entering of objects and liquids

---Never insert an 

object into the product through vents or openings. 

High voltages are present in the product and inserting 

an object can cause electric shock and/or short circuit 

internal parts. For the same reason, do not spill water or 

liquid on the product.

10.Servicing

---Refer all servicing to qualified service 

personnel. Servicing is required when the device has 

been damaged in any way, such as the power-supply 

cord or plug is damaged, liquid has been spilled, 

objects have fallen into the device, the device has been 

exposed to rain or moisture, does not operate normally 

or has been dropped.

11.Damage requiring service

---If any of the following 

conditions occurs, unplug the power cord from the 

AC outlet and request a qualified service technician to 

perform repairs.
a. When the power cord or plug is damaged.
b. When liquid is spilled on the product or when objects 

have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as 

described in the operating instructions.
Do not touch the controls other than those described 

in the operating instructions. Improper adjustment of 

controls not described in the instructions can cause 

damage, which often requires extensive adjustment 

work by a qualified technician.

e. If the product has been dropped or the cabinet has 

been damaged in any way.
f. When the product displays an abnormal condition 

or  exhibits  a  distinct  change  in  performance. Any 

noticeable abnormality in the product indicates that the 

product needs servicing.

12. Replacement parts

---In case the product needs 

replacement parts, make sure that the service person 

uses replacement parts specified by the manufacturer, 

or those with the same characteristics and performance 

as the original parts. Use of unauthorized parts can 

result in fire, electric shock and/or other danger.

13. Safety checks

---Upon completion of service or repair 

work, request the service technician to perform safety 

checks to ensure that the product is in proper operating 

condition.

14. Wall or ceiling mounting

---When mounting the 

device  on a wall or ceiling, be sure to install the 

product according to the method recommended by the 

manufacturer. This is a safety issue.

15. Stand

---Use only with the trolley, stand or wall mount 

specified through CE/UL/GS safety certificate. or sold 

with the device. Do not place the product on an unstable 

trolley, stand. Placing the product on an unstable base 

can cause the product to fall, resulting in possible 

serious injuries as well as damage to the device. 

16.Careful move

---When a trolley is used, be cautious 

when moving the trolley/device combination to avoid 

injury from the device tipping over. Sudden stops, 

excessive force and uneven floor surfaces can cause 

the product to fall from the trolley.
Careful move and be careful please, point of strength 

should not in display screen.
Never attempt to move the screen unless the AC  power 

cord has been disconnected.

17.Do not use this device near water

---for example, near 

a bathtub, washbowl, kitchen sink, laundry tub, in a wet 

basement or near a swimming pool, and the like. 

Содержание PM-TS55A/32/HD























Отзывы: