Additional Instructions - Ozone Ready Model - SSP-OZ
1.
Attach tubing from the
Ozone Out port on your
ozone generator to the
Ozone In port on the steam
sauna, which is located next
to the control panel.
2.
Turn on your oxygen source
and ozone generator to the
settings needed to produce
your desired ozone output. If
you have an O3Elite, a chart is
included on the unit itself or
in your manual.
3.
When fi nished with your
ozone sauna session, turn off
the ozone generator fi rst and
let the oxygen run for several minutes. Then turn off your oxygen.
Guide to Ozone Sauna Concentrations
LOW DOSES
(getting started)
Oxygen: 1/8 LPM
Gamma Range: 12 to 33
MEDIUM DOSE
(optimal range)
Oxygen: 1/8 LPM
Gamma Range: 32-53
HIGH DOSE
(advanced/higher intensity)
Oxygen: 1/8 LPM
Gamma Range: 51-75
Tips:
To speed up the heat time of your Steam Sauna Pro™, place a towel over the neck
opening. To reduce steam escape and increase the temperature inside the cabinet,
place a towel over your shoulders before entering the sauna. Towel clips are included
in the inside back of the sauna.
Note: The fi rst time you use your Steam Sauna Pro™ there may be a “new sauna smell”.
It may take a few sauna runs to alleviate the smell completely.
