Promix-SM308
4
6.
INSTALLATION AND CONNECTION
6.1 LOCK AND LATCH MOUNTING
1. Screw out the screw on the front surface of the lock and remove the cover.
2. Mount the lock on a wall, at a distance of 15mm from the locker wall edge.
3. Connect the lock to the power supply (see
6.3).
4. Insert the latch into the lock.
5. Test operability of the lock
– as voltage is applied, the lock must push out the latch.
6.
Fasten the latch to the door at a distance of 20±3mm from the base edge of the lock (see
Fig. below).
7. Test operability in door closing.
Fastening self-tapping screws
15
Locker wall
edge
Base edge of
the lock
3 holes
