Promise Technology VessJBOD 1000 Series, Руководство по эксплуатации продукта

Страница: 35 / 62

Chapter 3: Management
31
The system returns:
Link Status:
==================================================================
Phy Port Type Rate Init Dev Link PRdy
==================================================================
0 DSK01 SAS 3.0G OK End ---- Rdy
1 DSK02 SAS 3.0G OK End ---- Rdy
2 DSK03 SAS 3.0G OK End ---- Rdy
3 DSK04 SAS 3.0G OK End ---- Rdy
4 DSK05 SAS 3.0G OK End ---- Rdy
5 DSK06 SAS 3.0G OK End ---- Rdy
6 DSK07 SAS 3.0G OK End ---- Rdy
7 DSK08 SAS 3.0G OK End ---- Rdy
8 DSK09 SAS 3.0G OK End ---- Rdy
9 DSK10 SAS 3.0G OK End ---- Rdy
10 DSK11 SAS 3.0G OK End ---- Rdy
11 DSK12 SAS 3.0G OK End ---- Rdy
12 DSK13 SAS 3.0G OK End ---- Rdy
13 DSK14 SAS 3.0G OK End ---- Rdy
14 DSK15 SAS 3.0G OK End ---- Rdy
15 DSK16 SAS 3.0G OK End ---- Rdy
16 CN#1 ---- ---- ---- ---- ---- ----
17 CN#1 ---- ---- ---- ---- ---- ----
18 CN#1 ---- ---- ---- ---- ---- ----
19 CN#1 ---- ---- ---- ---- ---- ----
20 CN#2 SAS 3.0G OK End ---- Rdy
21 CN#2 SAS 3.0G OK End ---- Rdy
22 CN#2 SAS 3.0G OK End ---- Rdy
23 CN#2 SAS 3.0G OK End ---- Rdy
Phy : PHY ID Port: Port Id Type: SAS or SATA
Rate: Rate 3G/6G Init: Init Passed Dev : Device Type
Link: Link Connected PRdy: Phy Ready
------------------------------------------------------------------
The following items are reported in the table above:
• Phy – Each link is a PHY, numbered 0 through 23
• Port – DSK01 through DSK16 represent drive slots. Each slot has one PHY.
See page 30, Figure 6.
CN#1 refers to the SAS IN port and CN#2 refers to the SAS OUT port on the
I/O module. Each port has four PHYs. See page 25, Figure 4.
• Type – Physical drive type, SAS or SATA