Redundancy Check
Redundancy Check is a routine maintenance procedure for fault-tolerant disk arrays (those with redundancy)
that ensures all the data matches exactly. Redundancy Check can also correct inconsistencies.
Starting, Stopping, Pausing and Resuming Redundancy Check
To make
Redundancy Check settings:
1.
Click the
Administration
tab.
2.
Click the
Background Activities
tab.
The list of background activities appears.
3. Use the check boxes to select the pools to run Redundancy Checks. Note that you can also enable/
disable
Auto Fix
and
Pause on Error
for each pool.
4. To begin Redundancy Check on existing pools, click the
Start
button. To Pause a Redundancy Check for
a pool, click on the Gear icon for the pool and select
Pause
; click
Resume
to continue the Redundancy
Check. To Stop a running Redundancy Check, click on the Gear icon, select
Stop
. Stopping Redundancy
Check requires confirmation by typing “Confirm” in the Confirmation pop up menu and clicking on the
Confirm
button.
Redundancy Check actions menu
157
Promise
Technology
Management with WebPAM PROe
