t
Ask
4: M
AnAgeMent
c
onnection
This section describes how to establish a management connection to the Vess
A3120 system. There are two methods to establish the physical connection used for
management of the device. The Vess A3120
can be remotely managed through the
IP network. Alternatively you can attach a monitor to the VGA, HDMI or Display Port,
and connect a USB keyboard and manage the initial setup configuration via direct
connection to the device. This Quick Start Guide describes only the second option,
connecting to the device with a monitor and keyboard. For remote management
through the surveillance and data network, please see the Product Manual.
m
AnAgement
p
Ath
-
on
sIte
keyboArd
And
monItor
Use a USB keyboard and a VGA, Display Port, or HDMI monitor to establish a direct
out-of-band connection to the management software. The VGA, Display Port, HDMI
and USB ports are located on the back of the Vess A3120.. Connect a VGA, Display
Port or HDMI monitor to the appropriate video monitor port, and connect a USB key-
board to any USB port on the rear panel.
Management via direct attached keyboard and monitor is done with the command line
interface (CLI). Please see the Product Manual for a list of commands, use and login
information.
Vess A3120 rear panel video monitor connections and USB ports
HDMI port
Connect to
HDMI monitor
Display Port
Connect to Display
Port monitor
VGA port
Connect to
VGA monitor
USB ports
two USB 2.0 and four 3.0 ports; connect to keyboard
15
Vess A3120
Storage Appliance for Video Surveillance
