I
nstAll
the
slIdIng
rAIls
And
plAce
devIce
In
rAck
Follow these steps to install the sliding rails in the rack system, then place the Vess
A3120 onto the rails and secure the device to the rack.
2: I
nstall
In
rack
Before installing the VTrak enclosure in the rack, first re
-
move the drive carriers with the hard disks installed to re-
duce the weight of the enclosure.
To install the VTrak J5300/J5320 1U subsystem into a rack
with the supplied mounting rails:
1.
Determine what height to place the 1U enclosure
in the rack, then place the right and left rack rails
at the same height on in the right and left rack
Note
The sliding rail assembly is required for rack installation. The
hardware is available for purchase. Contact your sales representative
if you plan to install this system in an equipment rack.
Promise Technology
8
Quick Installation Guide
Lock release lever (back left)
Determine which holes to use on rack
