Promise Technology Ultra100 TX2, Руководство пользователя

Страница: 23 / 39

Ultra100™ TX2 User Manual
19
Netware 4.11
NWPA Update Package Installation Instructions for NetWare 4.11
Before installing the Ultra100 TX2 NetWare driver, make sure that you have installed
the latest update for the NetWare 4 operating system.
1. From the website at http://developer.novell.com/devres/sas/certinfo.htm
download NWPA_UP.EXE from the "Download the Update Package" link.
2. Install DOS and the CD-ROM driver on the target server machine.
3. Create the directory C:\UPDATE, and then change to that directory.
4. Copy NWPA_UP.EXE to C:\UPDATE.
5. Execute NWPA_UP.EXE in the C:\UPDATE directory.
6. Delete NBI31X.NLM, NWTAPE.CDM, and NWTAPE.DDI.
For new NetWare 4.11 servers:
Note : If your server already has NetWare 4.11 installed, jump to step 7
of the next section "For Existing NetWare 4.11 Servers."
7. Change directory to the D:\ directory on the CD-ROM drive, if its drive letter
is D:
8. Enter install at the DOS command line. Proceed through the installation of
NetWare 4.11 as usual.
9. When prompted by Install to select a device driver to load, select the
ULTRA.HAM driver.
10. Switch to console mode by using <ALT><ESC> before continuing
installation, and type "load c:\update\IDEHD.CDM". Do this is to make sure
that the IDEHD.CDM is version 2.00 (1998-8-5) or newer. (The older default
IDEHD.CDM doesn't support LBA mode addressing, and will have problems
with the ULTRA.HAM driver.)
11. After IDEHD.CDM is loaded, use <ALT><ESC> to switch to the installation
monitor and proceed through the installation of NetWare 4.11 as usual.
When the installation program prompts you to edit STARTUP.NCF, enter the
following lines after any set parameters but before any file loading, then
save the file:
load c:\update\nwpa
load c:\update\nbi
load c:\update\idehd.cdm