Promise Technology Ultra100 TX2, Руководство пользователя

Страница: 15 / 39

Ultra100™ TX2 User Manual
11
Windows 98
Installing Drivers During Windows 98 Installation
The following details the installation of the Ultra100 TX2 drivers while installing
Windows 98 (with the Ultra100 TX2 controller card already in place). If you’re
installing the Ultra100 TX2 drivers on a system with Windows 98 already installed,
see “Installing Drivers with Existing Windows 98.”
1. After installing the Ultra100 TX2 controller card and configuring the hard
drive(s), partition and format your hard drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, go the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double -click on the “System” icon.
6. In the “System” window, ch oose the “Device Manager” tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI Mass
Storage Controller.” Choose it and then press the “Properties” button.
8. Choose the “Driver” tab in the “Properties” window, choose “Update
Driver,” a nd then press “Next.”
9. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
10. Choose “Specify Location,” and then type “A: \WIN9X-ME” in the text box.
11. Insert the “Ultra100 TX2 Driver” diskette into the A: drive.
12. Press the “Next” button. A message informing you that Windows has found
“Win9x-ME Promise Ultra100 TX2™ IDE Controller ” should appear.
13. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart
your computer. Be sure to remove the diskette from drive A:.