background image

Return ONLY the specific product covered by the warranty. Do not ship cables, manuals, CDs, etc.

USA and 

Canada:

Promise Technology, Inc. 

Customer Service Dept. 

Attn.: RMA # ______ 

47654 Kato Road 

Fremont, CA 94538

Asia-Pacific:

Please return the product to your dealer or retailer or Contact 

Promise technical support for instructions before shipping the 

product.

Other Countries Please check Promise E-Support:   https://support.promise.com  

for the location nearest you. Contact the office or repair depot for 

full instructions before shipping the product.

You must follow the packaging guidelines for returning products:

• 

Use the original shipping carton and packaging

• 

Include a summary of the product’s problem(s)

• 

Write an attention line on the box with the RMA number

• 

Include a copy of your proof of purchase

You are responsible for the cost of insurance and shipment of the product to Promise. Note that 

damage incurred due to improper transport or packaging is not covered under the Limited Warranty.

When repairing returned product(s), Promise may replace defective parts with new or reconditioned 

parts, or replace the entire unit with a new or reconditioned unit. In the event of a replacement, the 

replacement unit is under warranty for the remainder of the original warranty term from purchase date, 

or 30 days, whichever is longer.

Promise pays for outbound standard shipping charges only. You must pay for any additional shipping 

options, such as express shipping and return of the defective part or unit.

241

Technical Support

Pegasus32 Product Manual 

 

 

 

 

  

Содержание Pegasus32 R4












































































































































































































































































Отзывы: