Promise Technology Pegasus2 R2+ Скачать руководство пользователя страница 68

Страница: 68 / 78

naDequate

irculation

Air circulation around the Pegasus unit might be a more complex problem. Check for these conditions:

•

Accumulated dust or objects blocking the fans.

•

Less than a minimum of 13 cm (5 inches) space between the back of the unit and the wall or other

object.

•

Ambient temperature above 35°C (95°F) where the unit is operating.

To cool down a Pegasus unit:

• Correct any problems identified above.

•

Shut down the Pegasus unit.

Press and hold the Power Button for a few seconds until the LED turns red. The PROMISE Utility

displays the message:

Unable to connect to the device

•

Wait at least one hour, then restart the Pegasus unit.

Press the Power Button. The Pegasus boots within a few seconds.

oWer

upply

The power supply used in the Pegasus unit is not field-replaceable. If there is any problem with the

power supply, contact Technical Support to make arrangements for a repair. See “Contacting Technical

Support” on page 130.

Promise Technology

Содержание Pegasus2 R2+













































































Результаты поиска

Содержание Pegasus2 R2+

Отзывы:

Бренды по названию

Популярные бренды

Promise Technology Pegasus2 R2+, Руководство по эксплуатации продукта

Результаты поиска

Содержание Pegasus2 R2+

Отзывы:

Бренды по названию

Популярные бренды