Promise Technology Pegasus R4 Скачать руководство пользователя страница 118

Страница: 118 / 148

Pegasus R6, R4 Product Manual

110

Disk Array and Logical Drive Problems

Disk array and logical drive troubleshooting includes:

•

Disk Array Degraded/Logical Drive Critical (page 110)

•

Disk Array Offline/Logical Drive Offline (page 111)

•

Repairing an Offline Disk Array or Logical Drive (page 111)

•

Rebuilding a Disk Array (page 112)

•

Incomplete Array (page 112)

•

Unreadable Disk Warning (page 114)

Disk array problems typically result from a physical drive failure. The most
common problem is a degraded disk array. The RAID controller can rebuild a
degraded disk array. See “Rebuilding a Disk Array” on page 112.

Disk Array Degraded/Logical Drive Critical

Disk arrays are made up of physical drives. Logical drives are created on the disk
array.

When one of the physical drives in a disk array fails:

•

The operational status of the disk array becomes

Critical

•

The operational status of the logical drives becomes

Critical

Degraded

•

The operational status of the physical drive becomes

Dead

Offline

The Promise Utility reports these conditions in the following places:

•

Dashboard icon – A yellow !

icon beside the disk arrays, logical drives,

and physical drives under System Status.

•

Physical Drive icon – Physical drives are shown Dead or Offline and marked

with a red X

icon, or Missing.

•

Logical Drive icon – Disk Array and Logical Drive are marked Critical with a

yellow !

icon.

RAID 6 logical drives are marked:

•

Degraded with a yellow !

icon when ONE physical drive is offline.

•

Critical with a yellow !

icon when TWO physical drives are offline.

RAID 0 logical drives show Offline status and a red X

icon.

•

Events icon – Logs a Major event for the logical drives and a Warning event
for the physical drive.

Содержание Pegasus R4





















































































































































Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды

Promise Technology Pegasus R4, Руководство по эксплуатации продукта

Результаты поиска

Содержание Pegasus R4

Отзывы:

Похожие инструкции для Pegasus R4

Бренды по названию

Популярные бренды