background image

FastTrak SX4300, SX8300 User Manual

64

Return ONLY the specific product covered by the warranty (do not ship cables, 
manuals, diskettes, etc.), with a copy of your proof of purchase to: 

You must follow the packaging guidelines for returning products:

Use the original shipping carton and packaging

Include a summary of the product’s problem(s)

Write an attention line on the box with the RMA number

Include a copy of proof of purchase

You are responsible for the cost of insurance and shipment of the product to 
Promise. Note that damage incurred due to improper transport or packaging is 
not covered under the Limited Warranty.

When repairing returned product(s), Promise may replace defective parts with 
new or reconditioned parts, or replace the entire unit with a new or reconditioned 
unit. In the event of a replacement, the replacement unit will be under warranty 
for the remainder of the original warranty term from purchase date, or 30 days, 
whichever is longer.

Promise will pay for standard return shipping charges only. You will be required to 
pay for any additional shipping options (such as express shipping).

USA and Canada:

Promise Technology, Inc.
Customer Service Dept.
Attn.: RMA # ______
47654 Kato Road
Fremont, CA 94538

Other Countries:

Return the product to your dealer 
or retailer.

Contact them for instructions 
before shipping the product.

Содержание FASTTRAK SX4300







































































Отзывы: