ProMinent ProMix C, Руководство по эксплуатации

Страница: 11 / 59

Pr o Minent ProMix
‘S & C’ Polymer Feeder
ProMix Series S&C User Manual
1.0 INSTALLATION & QUICK START GUIDE
1.1 Safety:
Utilize appropriate protective safety gear when operating or maintaining this equipment.
Recommended safety gear is as follows:
Personal Protective Equipment (PPE):
•
Hard Hats (Where overhead hazards exist)
•
Safety Glasses with side shields
•
PVC Apron
•
PVC Gloves
•
Safety-Toed Work Boots
1.2 Delivery & Storage Checklist:
1. Check packing list for completeness and note any missing items immediately.
2. Inspect equipment and shipping container for damages before accepting delivery.
Make note of
the carrier’s bill-of-lading the extent of the damage, if any, and notify the
carrier.
3. Store the equipment on firm level surface in original packing container. Do not store the
equipment where it may be exposed to extreme temperatures, precipitation, humidity, or
dust. Avoid direct sunlight that could overheat and damage equipment.
Ambient Conditions for storage and transport:
Temperature:
14°F to 120°F
Air Humidity:
≤ 92% relative humidity, non-condensing
1.3 Installation Considerations:
•
Required Polymer System Voltage
•
Available Water Pressure
•
Injection Point Pressure
•
Number of Injection Points
•
Polymer Solution Discharge: For example (Length of Piping Run and Pipe Size)
•
Neat Polymer Suction: Flooded or Lift
•
Type of Application / Dewatering Device
•
Type of Polymer: Emulsion, Dispersion, Solution