manualshive.com logo in svg

ProMinent Duodos 100 PPS, Руководство по сборке и эксплуатации

Поделиться
Скачать
ProMinent Duodos 100 PPS Скачать руководство пользователя страница 21

The pump is working but no liquid is escaping.
Cause:

Recommended measure:

The valve on the suction side is not open.

Open the valve on the suction side.

Too high a suction or discharge lift.

Check the configuration of the installation and reduce the

height of the installation

The outlet opening of the fluid line (including the

filter) is blocked with foreign bodies.

Check and clean the liquid line.

The pump is blocked.

Dismantle the pump, then check and clean the pump.

The ball and the ball seat are worn or damaged. Check the components and replace if necessary.

The flow volume is reducing.
Cause:

Recommended measure:

The air pressure is low

Check the compressor and the configuration of the air

line.

The air line and the ancillary equipment are

blocked with foreign bodies.

Check and clean the air line.

The outlet valve on the discharge side is not

opening normally.

Adjust the outlet valve on the discharge side.

The liquid is mixing with air.

Top up liquid if necessary. Check and adjust the configu‐

ration of the line on the suction side if necessary.

Cavitation will be caused.

Adjust the air supply pressure and the outlet pressure

and reduce the suction capacity

Vibrations.

Adjust the air pressure and the outlet pressure. Reduce

the flow of the inlet valve to adjust the pressure and

volume of the fluid.

Ice formation in the air outlet.

Remove ice from the air bypass valve and check and

clean the air filter. Use a longer intermediate pipe in the

exhaust air to prevent ice from forming in the silencer.

The liquid line (including the filter) is blocked

with foreign bodies.

Check and clean the liquid line and the filter mesh.

The outlet opening or the silencer of the pump is

blocked with foreign bodies.

Check and clean the outlet opening and the silencer.

The pump is blocked with foreign bodies, e.g.

sludge.

Remove, check and clean the pump housing.

Escape of liquid through the open compressed air outlet (silencer).
Cause:

Recommended measure:

The diaphragm is faulty

Remove and check the pump and replace the dia‐

phragm.

Maintenance of the double diaphragm pump

 

 

 

21

Содержание Duodos 100 PPS









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды