ProMinent DULCOnvert, Руководство по установке и настройке, Страница: 13 / 24

Name No. Type Description
Start-Stop 2 BYTE Corresponds to Start-Stop switch; if Start-Stop = 0, then the
pump is stopped.
Reset 3 BYTE If the “Reset” value is switched from 1 to 0, the internal
pump memory is deleted (e.g. with batch metering) and - as
far as possible - existing errors are deleted.
Mode 4, 5 BYTE Value Name Description
0 Stop Pump is ready but not
metering.
1 Manual Pump is metering continu‐
ously at the set frequency.
2 Batch When triggered, the pump
meters the number of
strokes set in batch prese‐
lection.
3 Contact Pump is metering the
number of strokes calculated
from the product of “Number
of triggers * External factor”.
4 Analogue
operating
mode
Pump meters according to
the analogue signal and the
„Analogue“ operating mode
set on the pump.
Frequency 6, 7 UINT16 Set metering frequency in strokes / hour ( 0.. “Maximum fre‐
quency”).
Actual fre‐
quency
8 UINT16 Actual metering frequency in strokes / hour ( 0.. ‘Maximum
frequency’).
Maximum fre‐
quency
9 UINT16 Maximum metering frequency in strokes / hour (0...12000).
The maximum frequency can be significantly lower than in
normal mode according to the metering mode set.
Batch prese‐
lection
10, 11 UINT32 Number of strokes in batch operation per trigger. (0…
99999).
Batch start 12 BYTE If the value changes from 1 to 0, batch metering is activated
in batch operation. Batches can also be activated via the
contact input.
Batch
memory
13 BYTE If the batch memory is activated and a new batch is trig‐
gered during batch metering already in progress, the
remaining strokes are increased by the number of the new
batch.
If the memory is not activated, the remaining strokes of the
batch not yet processed are deleted and the new batch is
processed.
Remaining
strokes
14 UINT32 The strokes still to be processed with batch metering
External
factor
15, 16 UINT16 Factor by which the incoming pulses are multiplied. The
factor is given as a hundredth. Value range is 1…9999 - the
factor is then 0.01…99.99.
External
memory
17 BYTE Analogue, like batch metering, is also added up here with
high factors or the remaining strokes are deleted.
Stroke length 18 BYTE Stroke length set on the pump (0...100%)
Operation
13