ProMinent DULCOnvert, Руководство по установке и настройке, Страница: 12 / 24

Name No. Type Description
2 02 – Diag‐
nose
05 - Power‐
down
3 Mode 00 – halt 03 –contact
4 01 – manual 04 - analog
5 02 – batch
6 Error There are errors - see
"Errors"
7 Warnings There are warnings - see
"Warnings"
8 Stop Pump has stopped
9 Priming Pump is in priming mode
(higher-level function)
10 Auxiliary Pump is in auxiliary mode
(higher-level function)
11 Pause Pump has been switched to
Pause (higher-level function)
12 Module Automatic mode
13 Flow Metering monitoring acti‐
vated
14 Batch-Mem. Batch memory is activated
15 Calibrated Pump is calibrated
16 Relay 1 Relay 1 is physically present
17 Relay 2 Relay 2 is physically present
18 AnalogOut Module is physically present
19 Diaphragm
rupture
Diaphragm rupture option is
installed
20 Concentra‐
tion
Concentration calculation is
activated (delta ® only)
21 - -
22 - -
23 Airlock Drive control signals air in
the dosing head (delta ® only)
24 Overpressure Drive control signals “too
high back pressure”
25 At atmos‐
pheric pres‐
sure
Drive control signals “no
back pressure” (delta ® only)
26 Bleeding Pump bleeding at the
moment (delta ® only)
27 - Always true
28 Direct mode Pump is working in direct
mode (limited range of func‐
tions) (delta ® only)
Operation
12