ProMinent DULCO turb C Series, Руководство по сборке и эксплуатации, Страница: 17 / 76

4 Mounting and Installation
NOTICE!
Drying agent
Possible device malfunctions due
to moisture in the device.
Install the drying agent bag before
initial commissioning, see
Ä
Chapter 6.1 „Load drying
agent“ on page 30
NOTICE!
Mounting position and conditions
– The installation (electrical)
may only take place after
mounting (mechanical)
– Ensure that there is unim‐
peded access for operation
– Ensure for secure and vibra‐
tion-free fastening.
– Avoid direct sunlight
– Permissible ambient tempera‐
ture for the sensor at fitting
position: 1 ... 50℃ at max.
95% relative air humidity (non-
condensing)
– Consider the permissible
ambient temperature and the
connected components
Reading and operating posi‐
tion
–
Install the device in a favour‐
able position for reading and
operating (preferably at eye
level)
Mounting position
–
Leave sufficient free space for
the cables and necessary
work
Packaging material
Dispose of packaging material
environmentally. All packaging
components are provided with
their corresponding recycling
code.
Mounting and Installation
17