Prominence Home Eclora 51672, Руководство пользователя, Страница: 9 / 12

9
ASSEMBLY INSTRUCTIONS
13. Install the E26-base LED bulbs into the sockets of the
light kit.
Important:
Make sure you allow the bulbs and light kit to
cool before you replace the bulbs.
13
Wall Bracket
Mounting Screw
15. If desired, the wall bracket in remote pack can be
installed to a wall using the provided mounting screws.
Store the remote on the wall bracket when not in use.
16. Turn ON the electrical power at the main fuse or
circuit breaker and the wall switch.
Installation is complete.
Battery Cover
Battery Compartment
Front
Back
High
Speed
14. Remove the battery cover from the back of the
remote found in the remote pack. Insert the battery
from remote pack into the remote; ensure polarity of
battery matches the polarity indicated in the battery
compartment -- positive (+) to positive (+) and negative
(-) to negative (-). Replace the battery cover and press
the HIGH fan speed button on the remote to ensure the
remote turns on the fan.
Note: If remote does not turn on fan, see page 11.
15
16
14
Bulb
Light Kit