Prominence Home Eclora 51672, Руководство пользователя, Страница: 10 / 12

D CFL
LEARN
2
OPERATING INSTRUCTIONS
1
2. Remove battery door from back off the remote to
access the following:
D/CFL Switch - Switch should be set to “CFL” to
correspond with standard non-dimmable bulbs; set to “D”
for incandescent and other dimmable bulbs.
LEARN -
Syncs remote to receiver (see troubleshooting
for instructions).
2
1. To operate the fan using the remote from remote pack,
press and release the following buttons:
III -
High speed
II - Medium speed
I -
Low speed
Fan Off -
Turns power off to fan.
Light Delay - Tap the light delay button, which will turn
off the light after one minute. Tap the light control button
to exit light delay mode.
Light Control -
Tap the light control button to turn the
light off and on. Press and hold light control button to
dim or brighten the lights.
Reverse Switch - In warmer weather, push the reverse
switch left toward sun icon, which will result in downward
airflow creating a wind chill effect.
In cooler weather, push the reverse switch right toward the
snowflake icon, which will result in upward airflow that
can help move hot air off the ceiling.
Important:
Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle position,
the fan will not operate.
LED Indicator -
LED Indicator will flash for one minute as
a reminder to replace the 12-volt battery.
Battery Compartment
(battery door removed)
10
High Speed
LED Indicator
Medium Speed
Low Speed
Fan Off
Learn
D/CFL
Light Delay
Light Control
Reverse Switch