3 - 2
Adjustment
2. Adjustment of the Motor Belt Tension
• When pulling on the middle portion of the motor belt with a force of 2 N (200 g), there should be a slack of 4
to 6 mm.
1
Loosen the two screws (Bolt, (S/P washer) M 5
×
12) fastening the motor holder.
2
Adjust the belt tension by moving the motor holder up or down.
3
Tighten the two screws (Bolt, (S/P washer) M 5
×
12) to secure the motor holder.
4
Check the motor belt tension again.
4 - 6 mm
Bolt, (S/P washer) M5 × 12
Motor holder
Tension guage
2N(200g)
www.promelectroavtomat.ru
