DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
The recommended curing times are intended for each layer applied.
The surface will remain sticky until use of cleanser.If the customer should ex-
perience a burning feeling on the nail plate when gels have been used, this
is caused by the applied gel and not by the
Promed UV-LED 8
UV lamp.
Possible causes include outdated gel and cheap gel of poor quality.
In case of malfunction:
•
Check that the power supply is correct.
•
Please contact your service point if the problems are not yet solved.
MAINTENANCE TIPS
To ensure that the safety, reliability and performance of the unit are not
adversely affected, enhancements, readjustments, alterations or repairs are
not permitted aside from those performed by
Promed
authorized persons.
A
.
Keep the inner parts of the lamp as free as possible from gel and acrylic
residue.
B.
Remove dirt from the outer surface of the device with a cloth moistened
with alcohol. Prevent moisture from entering the unit.
C.
Adhere to the safety measures stipulated by the manufacturer.
D.
The casing may only be cleaned with a moist cloth. Do not use any
cleaners containing solvents; use only plain water.
SAFETY INSTRUCTIONS
Please pay attention to the following before first time operation:
Never place the unit in direct contact with fire, gas, oxygen or hot objects
such as hot plates.
Please observe the following during operation:
A.
Power supply for the device: 100 V~ -240 V~.
B.
Take any measures necessary to prevent the device from falling or
becomes damaged in any way.
C.
If problems do arise with the unit handpiece, take it immediately to get it
repaired.
D.
Do not lubricate or wash the unit.
E.
For indoor use only.
Downloaded from www.vandenborre.be