background image

USER GUIDE //

 STRETCHER SUPPORT SERIES PB-410

Review 2022/01

11

7. Crushing injuries could arise from sideways or extraction movements of the stretcher support. Always 

ensure that nothing interferes with the stretcher support before moving it.

8. Loading of the stretcher on the stretcher support, especially if the device is in tilted position, could need 

great effort from the operator, resulting in injuries. Pay attention during loading and unloading of the stret-

cher and, in case of heavy weight, consider that at least 2 operators are required.

9. The operation of any movement of the device when the vehicle is running, could result in extremely vio-

lent movements in case the vehicle has an impact. It is recommended to make the adjustments only when 

the vehicle is not moving

01.13  Life span

If used as described in the following instructions, this device has a useful life of 10 years from the date 

of purchase.

This useful life can be extended with annual reviews carried out by the manufacturer, which uses speciali-

zed and authorized internal and external technicians.

In case these annual checks are not carried out, the device must be disposed of according to the informa-

tion in paragraph 01.4 and the manufacturer must be notified.

Only the manufacturer or an authorized center can extend the life of the device, if it meets the safety requi-

rements.

Promeba, S.L. will not accept any responsibility for malfunction or damage caused by the use of devices 

that have not been checked by the manufacturer or authorized center, or that have exceeded the maximum 

allowed useful life.

01.12  Reference standards

As a distributor or end user of the products manufactured and/or distributed by Promeba, 

S.L., you are strictly obliged to know the legal provisions in force in the country of destination 

of the goods, applicable to the devices to be supplied (including the regulations relating to 

technical specifications and/or safety requirements) and, therefore, understand the necessary 

requirements to ensure compliance of the products themselves with all the legal requirements 

of the territory.

REFERENCE

TITLE OF DOCUMENT

UNI EN ISO 1865-5

Patient handling equipment used in road ambulances. Part 1. Table support 

brancard.

UNI EN 1789

Medical vehicles and their equipment. Road ambulances

01 

INTRODUCTION

Содержание PB-410 Series





























Отзывы: