Promax HD Ranger Lite Скачать руководство пользователя страница 90

Страница: 90 / 184

7-82

July 2015

Check how to connect and disconnect the LTE filter affects the

installation, by comparing the MER measure and the LTE band
power.

Measuring the signal with filter or without filter is not done simultaneously, but
alternately, by means of the

key that enables or disables the filter.

►

Screen description

The following describes the

LTE

display:

Figure 54.

Selected installation; date and time.

Elapsed time with filter enabled (ON).

Measurement with LTE filter enabled:

MER

Maximum and minimum MER for the TV channel tuned
(the one probably affected by the LTE interference signal).

LTE Power

: Maximum and minimum power for the LTE-800 complete

band, frequencies between 776 and 876 MHz.

LTE-800 spectrum band, frequencies between 776 and 876 MHz.

Identifier icon of the

LTE

filter ON.

Selected band; battery level.

Time elapsed with filter disabled (OFF).

Measurement with LTE filter disabled:

Содержание HD Ranger Lite

























































































































































































Результаты поиска

Содержание HD Ranger Lite

Отзывы:

Похожие инструкции для HD Ranger Lite

Бренды по названию

Популярные бренды

Promax HD Ranger Lite, Руководство пользователя

Результаты поиска

Содержание HD Ranger Lite

Отзывы:

Похожие инструкции для HD Ranger Lite

Бренды по названию

Популярные бренды