Promax HD Ranger Lite Скачать руководство пользователя страница 44

Страница: 44 / 184

4-36

July 2015

4.3

Screen Description

Available views are:

SPECTRUM 1/3: SP MEASUREMENT

Figure 27.

Selected installation, date and time.

Number of view/total views.

Joystick active mode, selected band, battery level.

Measured values of the signal at the frequency/channel where is pointing
the cursor.

Spectrum in the band with the selected span.

Centre frequency and cursor. It also shows the bandwidth of a digital

locked signal.

Signal status (searching/locked/multiplex name/selected span).

Softkeys

menus.

►

Joystick up/down

It changes the reference level.

►

Joystick left/right

(depending on the joystick active mode):

: SPAN

change.

: Frequency change or channel change.

Marker change (if marker is ON).

Содержание HD Ranger Lite

























































































































































































Результаты поиска

Содержание HD Ranger Lite

Отзывы:

Бренды по названию

Популярные бренды

Promax HD Ranger Lite, Руководство пользователя

Результаты поиска

Содержание HD Ranger Lite

Отзывы:

Бренды по названию

Популярные бренды