Promax DT-802, Руководство пользователя

Страница: 26 / 42

CONTROL MODULE. DT-802
3.- To move between characters press the RIGHT or LEFT . To
delete a character do a long press (1 s) by pressing RIGHT or
LEFT
.
4.- To change a character press the UP or DOWN . To vary the
type of character (uppercase and lowercase letters, symbols or
numbers) make a long press (1 s) with the UP or DOWN
key.
5.- When you are finished editing press ENTER to validate the text
and exit the menu.
E a value after changing it you must press ENTER
WARNING!
To VALIDAT or UP .
If you press ESCAPE the value will not be accepted.
For the changes were applied, you must SAVE previously the settings. There are
o different ways to save the settings made:
using the SAVE option on each module.
n the other hand you can save the settings of all modules at once using the
SAVE
.7.4 DT-802 Configuration
and power module, and therefore is the most important
odule of the DTTV . The DT-802 controls the DTTV headend. Two wire-bus connect
the c
tw
On one hand you can save your settings
O
ALL option, which is on the DT-802 menu.
4
The DT-802 is the control
m
ontrol module to the remaining modules of the headend. The DT-802 allows the
control and configuration of each module in a separate way.
Page 22 04-2015