Promax CABLE RANGER, Руководство пользователя

Страница: 9 / 73

April 2018 4 Chapter 2: SETTING UP
Connect the DC power adapter to the equipment through the power connector
on the left side panel (see figure).
Figure 2.
Then connect the DC power adapter to the mains via the mains cord. Ensure that
your mains voltage is compatible with the adapter voltage.
For a fast charging of the battery is necessary to switch off the equipment.
If the equipment is ON, the battery charging will be slower, depending on the
type of work you are doing. When connecting the equipment to the mains the
mains connected symbol appears inside the battery icon.
The CHARGER led indicator shows the battery status:
„
Red: Battery charging.
„
Off: Battery full charge.
When switching on the equipment, the battery voltage is checked. If the tension
is too weak to start, the equipment does not start up. In this case please charge
the battery immediately.
Average charging time with the equipment off (fast charge):
„
3 hours to achieve an 80% charge.
„
5 hours to achieve an 100% charge.
With the equipment on (slow charge):
„
5 hours to achieve an 80% charge.
„
8 hours to achieve a 100% charge.
2.2.3 Charge / Discharge times