4.2.2 M easurement mode: Analogue or digital channels
The AN ALO G [10] and D IG IT AL [11] keys can be used to define the type of
channel to be measured: analogical or digital, respectively.
When the analogical channel measurement mode is selected, an 'a' appears on
the display to the right of the units. Likewise, when the digital channel
measurement mode is selected, a 'd' appears on the display to the right of the
units.
The measurements possible for each type of channel are as follows:
Analogue channels
:
-
Carrier level meter
-
Carrier to Noise (C/N) ratio meter
-
Video/Audio (V/A) ratio meter
D igital channels
:
-
Channel power meter
-
Carrier to Noise /C/N) ratio meter
Note:
Channel denomination and frequency can be modified via the PC using
the RM-006 software.
