4.2 O perating instructions
4.2.1 T uning mode selection
The P R O M AX -6 has two different tuning modes:
By frequencies
:
From 5 to 862 MHz in steps of 62.5 kHz, using the rotary switch.
The values displayed are given in MHz, with a two-decimal
resolution.
By channels
:
The channel plan in the CCIR standard or may be established
under request (OPT-006-61), or be configured by the user
(RM-006), with a maximum of 239 channels.
To pass from one mode to the other push the C H AN key [16].
E xample 1:
Changing from channel mode to frequency mode.
This procedure can be useful in discovering the real frequency in MHz of the
selected channel. The example illustrates finding the frequency which corresponds
to channel 44.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
