E xample 2:
To change the frequency value from 62.25 MHz up to 850 MHz.
Due to the high resolution of the instrument (62.5 kHz) it is not very efficient to
move through all the bands in frequency mode. A satisfactory solution is to use the
channel mode to make substantial changes in frequency, as is shown in the
example below.
C69
The selection of the channel situated in a frequency close to the desired
frequency.
850.25
N ote:
When changing from frequency to channel, if the frequency tuned does not
correspond to any channel, the P R O M AX -6 will search for the channel nearest to
this frequency and will remain tuned to this channel. This operation may take
several seconds.
