Promax 10 SE, Руководство пользователя

Страница: 76 / 154

USER’S MANUAL. PROMAX-10 Premium
Page 16 11/2008
The Edit Channel Plan function allows to automatically activate all the channels
defined in the channel plan by means of the ALL field on the third line. When to the
right of ALL we select ON , all the channels of the plan will be activated, otherwise, if we
select OFF all channels will be deactivated. In order to activate / deactivate a particular
channel, turn the rotary selector [9] until this one appears shaded and then press it, the
cursor will jump to the
ON column, then turning the selector it will be possible to activate
it (it appears a cross) or to deactivate it (it does not appear a cross).
By means of the Edit Channel Plan function also it is possible to define
channels as analogue or digita l. To do this, turn the rotary selector [9] until the channel
that you wish to modify appears shaded and then press it twice, the cursor will jump to
the
DIG column, then turning the selector it will be possible to define it as digital
(appears a cross, channel C02 in the example of the previous figure) or as analogue (it
does not appear a cross). In the case of selecting it as digital it is possible to access
directly to the digital channel configuration. In order to return to the Edit Channel Plan
function press the
CONFIG [14] key.
After editing an analogue channel, the feature
∆
FCH appears at 0.00 MHz. It is
the displacement of the channel when it is tuned, for those channels that have the
frequency displaced relating to the standard frequency. You can vary within a range
from -2.00 to +2.00 MHz.
You can also edit
∆
FCH and the parameters QAM in the channel configuration
by the EDIT CHANNEL menu.
To modify the rest of characteristics of the channel plans it is necessary to have
the RM-010 software (optional accessory).
c) UNITS
The PROMAX-10 Premium permits to select the level units between dBmV , dBµV
and dBm .
d) TIME
To enter the time select the TIME field and press the rotary selector. Firstly, turn the
rotary selector to change the minutes field. Next press the selector again to modify
the hours and finally press it once again to confirm the new time.
e) DATE
To enter the date select the DATE field and press the rotary selector. First change
the year field, then the month and finally the day.
The parameters which may be modified on the second page of the global
configuration menu of the unit are as follows:
CONFIG : 2/ GLOBAL 2
AUTO POWER OFF ON
BEEP ON
LANGUAGE ENGLISH
VLNB OFF
BER RESOLUTION LOW
SW Version 7.06
Figure 7.- Global configuration. 2/2.