These operating instructions to be read in conjunction with the Owners Manual.
Page
7
of
12
2. Machine setup
o
The knife edge system
The correct setting of the knife edges will help to ensure
trouble free operation of the trap. Place a clay in one of the
pockets of the carousel and rotate the carousel so that the
clay just passes through the knife-edges. The clay should
pass underneath the blades with a clearance of around
0.5mm. Using a 10mm spanner,
check and adjust the height of the knife-edges if required by
moving the nuts on the threaded stud on the leading edge of
the knife edge block. Make allowances for clay thickness
variation by checking several clays, ideally from different
boxes.
o
The Back-rail
The back-rail should need no adjustment as supplied from the
factory. However, adjustment can be made to modify the clays
flight right or left. Adjustment is made by slackening the bolt at
the front end of the back-rail and moving the back-rail as
necessary. By moving the rail forward, the clays trajectory will
be moved to the left. Moving the rail backwards alters the
flight to the right.
