PROMAT PROMAFOUR Скачать руководство пользователя страница 15

Страница: 15 / 16

Fix the PROMAFOUR

construction boards to the vertical PROMAFOUR

-STUDS with staples or screws, depending

on the design and the structure of the encasement and the installer’s equipment. The cutting, drilling, sanding etc. can be

executed with traditional tools. If you prefer using stainless steel screws, you have to pick sharp-pointed screws with a

self-milling head.

L = length of screw or staple

A = hart to hart distance

r = distance to the side of the board

d = thickness of the board

R = width of the staples

Fixation to metal profi les, thickness < 2 mm

Hardened steel phosphate drywall screws with Hi-Lo thread and milling ribs.

L = d + 25 mm

A = 250 mm

r = 15 mm

Fixation into the edge of the board and on PROMAFOUR

-STUDS

Staples

R = 10 mm when d ≥ 8 mm

L = 2 to 3 x d (min. 40 mm)

A = 250 mm

A = 100 mm stapled alternating at an angle to the edge r = 8 mm (PROMAFOUR

-STUDS)

For functional reasons, the boards which are fi xed with staples have to have a minimal thickness of 12 mm.

Hardened steel phosphate drywall screws with Hi-Lo thread and milling ribs.

L = d + 25 mm

A = 250 mm

For functional reasons, boards which are fi xed with screws, have to have a minimal thickness of 15 mm.

Depending on the type of stove (wood- or gas-fi red) and its dimensions, we recommend you to build the PROMAFOUR

encasement as described in the table below and following the installation instructions. When casing a large fi re, if you want

to attach heavier objects, such as a fl at screen or a mirror to the encasement or if you want to tile it, we recommend a

PROMAFOUR

construction board with a thickness of 18 mm.

Construction recommendations

Fixing mediums

Tables

Type of fi re

Width of
the fi re

Thickness of
the board

Use of PROMAFOUR

-STUDS and

U-profi les

Fixation

Wood-burning
stoves

≤ 1.25 m

PROMAFOUR

boards 12 mm

PROMAFOUR

-STUDS 68 x18 mm on corners.

Metal U profi les 70 mm on fl oor and ceiling.

PROMAFOUR

-GLUE 1000

and staples or screws.

Gas fi res

≤ 1.25 m

PROMAFOUR

boards 12 mm

Metal profi les or PROMAFOUR

-STUDS

68 x18 mm on corners.
Metal U profi les 70 mm on fl oor and ceiling.

PROMAFOUR

-GLUE 1000

and staples or screws.

Wood-burning
stoves or
gas fi res

≤ 1.25 m

PROMAFOUR

boards 15 mm
or 18 mm

No PROMAFOUR

-STUDS required.

Metal U profi les 70 mm on fl oor and ceiling.

PROMAFOUR

-GLUE 1000

and staples or screws.

Wood-burning
stoves or
gas fi res

> 1.25 m

PROMAFOUR

boards 12 mm
or 15 mm

PROMAFOUR

-STUDS 68 x18 mm on corners

and every 625 mm.
Metal U profi les 70 mm on fl oor and ceiling.

PROMAFOUR

GLUE 1000

and staples or screws.

Wood-burning
stoves

> 1.25 m

PROMAFOUR

boards 18 mm

PROMAFOUR

-STUDS 68 x18 mm on corners

and every 830 mm.
Metal U profi les 70 mm on fl oor and ceiling.

PROMAFOUR

-GLUE 1000

and staples or screws.

Содержание PROMAFOUR

















Результаты поиска

Содержание PROMAFOUR

Отзывы:

Похожие инструкции для PROMAFOUR

Бренды по названию

Популярные бренды

PROMAT PROMAFOUR, Руководство по установке

Результаты поиска

Содержание PROMAFOUR

Отзывы:

Похожие инструкции для PROMAFOUR

Бренды по названию

Популярные бренды